| 产地 | 江苏 |
|---|---|
| 应用领域 | 医疗 |
| 种类 | 非织造布生产线 |
| 包装类型 | 箱 |
| 品牌 | 阿莱特 |
| 型号 | ALT-175-2 |
| 加工定制 | 是 |
ALT-AUTO175-2型口罩机是一台全自动化生产外耳带口罩的生产设备。本机是有一自动分疏系统连接一台ALT-175口罩本体机和两台ALT-WD175型外耳带机组成。
本体机生产的口罩本体，可由PLC平均分配到两套外耳带机上以每分钟100-150片的速度生产。全过程都可以通过人机介面触摸屏操作控制。
这套组合除ALT-175型口罩本体机必需有，后段部分可根据客户要求任意换1，或者2套耳带点带机
ALT-AUTO175 is a unit of fully automatic ear-loop mask making machine. This machine unify 1 unitALT-175 and 2 units ALT-WD175 by a unit of automated dispenser.
Mask bodies produced on mother machine can be allocated onto 2 units child machine averagely by PLC atthe speed of 100-150 pieces per minute. All of operation of the machine
is controlled through touch screen,theinterface of man and machine.
On this combination the mask body machine can match with 1, or2units of ear-loop, machine
产品特点 FEATURES:
1.机台体积小，占地小，全机采用铝合金结构，美观坚固不生锈；
The machine is made of aluminum alloy which makes it beautiful,prevented from rust and has a small size.
2.产量极高，可根据客户要求生产1-5层口罩本体；
The machine can make the 1--5 levels mask blank according for the customer's require with a high output;
3.口罩本体的折叠位置可调整，尺寸也可调整；
You can adjust the size of the mask blank and the folding location；
4.口罩耳带的方向是向外；
The direction of the earloop is outside；
5.与分段口罩生产设备相比，此套设备更高效，更节省人工；
Compared with sub-mask production equipment, this set of equipment more efficient, more economicalartificial；
6.PLC程式控制，光电检测，可靠性极高，故障率低；
The computer program control and photoelectric detection make it have a high reliability and lowfailure rate；
机器规格 SPECIFICATION:
1.机台尺寸:4400*4000*1700mm. （输送带横着放宽度减少900mm）
Machine size: 4400(L)*4000(W)*1700
2.产量：80-95pcs/min
Throughput: 80-95cs/min
3.电压：220V or380 V
Line source: 220V or 380V, 1 or 3 phase
4.特殊要求：口罩本体尺寸必须固定
Special requirements: a mask body size must be fixed
5.气压：6KG/cm2
Atmospheric pressure:6kg/cm2(minimum)
6.功率：11KW
Power consumption: 11KW
配置： INSTRUCTIONS:
序号 | 项目 | 数量 |
1 | 超声波 | 6台（台湾） |
2 | 马达 | 1台（永坤） |
3 | 伺服电机 | 3台（台达） |
4 | 变频器 | 1台（四方） |
5 | PLC | 2台（台达） |
1台（三菱） | ||
6 | 触摸屏 | 1台（威纶） |
7 | 输送马达 | 5台 |
8 | 静电消除器 | 2台（广东） |
9 | 汽缸 | 新恭和亚德克 |
10 | 恒张力控制系统 | 4套 |
11 | 输送带 | 2套 |
12 | 轴承 | NSK |
13 | 框架 | 铝合金 |
14 | 封板 | 不锈钢 |
15 | 减速机 | 3台 |
No | Item | Quantity |
1 | Ultrasonic | 6sets(Taiwan) |
2 | Motor | 1set TaiWan “YongKun” |
3 | Servo motor | 3sets （Delta） |
4 | Inverter | 1set TaiWan “Sunfar” |
5 | PLC | 1set Japan “Mitsubishi” |
2sets (Delta) | ||
6 | Touch screen | 1 set TaiWan “Wei- Lun” |
7 | Transport motor | 5sets |
8 | Silent killer | 2sets(Guangdong) |
9 | Cylinder | New Christine and AirTAC |
10 | Constant Tension System: | four sets |
11 | Conveyor | 2 sets |
12 | Bearing | NSK |
13 | frame: | Aluminum |
14 | Closure plate | :stainless steel |
15 | Reducer | 3sets |
Payment:After 30% of the total value is paid in advance by (T/T),
The left 70% should be paid by (T/T) after you check up the finished
machine. And the cargo will be delivered after all the payment
arrives at our account.
Delivered time: 30days after confirm the order
Warrant term: 1 year
Package:Wooden Packing
Installationand test: The buyer should pay the round tickets， visa fee，food and accommodation in your country and our engineers $100 per day if youneed our training and installation abroad.
18221259202